This is a sample video. To access the full content, please Login
I wish to parameterize the internal component for example a current source in my sub-circuit, so that whenever I invoke this sub-circuit I would be able to specify the value of the current source as per the need. Thanks in advance!
I have practiced the steps followed by the tutorial to create a sub circuit for half adder, by using existing project stored in fossee file under subcircuit library I have selected Half adder, an already constructed circuit opens up and I have annotated and,in the netlist menu I have put spice to default and generated a netlist and saved that gone back to eSim window I selected convert kicad to ngspice, but a pop window appears that the sub circuit doesn't contains any kicad netlist, why?, Please give a reply for me.
https://drive.google.com/file/d/1ryIzlfDukCuVXLhjp9hhoUqIEbO53Vw0/view?usp=sharing
while working out in subcircuit model esim closes automatically
2476 visits
Outline:1. Introduction to Subcircuit Builder. 2. Creating a subcrcuit of Half Adder in eeschema. 3. Connecting Ports. 4. Generating KiCad netlist for the subcircuit. 5. Generating Ngspice netlist for the subcircuit. 6. Introduction to Library Editor and Part Library Editor. 7. Creating a Part Library/symbol for the subcircuit. 8. Adding Pins to the component symbol. 9. Verifying the component in the KiCad library. 10. Simulating the subcircuit using HA_Test example
1. Introduction to Subcircuit Builder. 2. Creating a subcrcuit of Half Adder in eeschema. 3. Connecting Ports. 4. Generating KiCad netlist for the subcircuit. 5. Generating Ngspice netlist for the subcircuit. 6. Introduction to Library Editor and Part Library Editor. 7. Creating a Part Library/symbol for the subcircuit. 8. Adding Pins to the component symbol. 9. Verifying the component in the KiCad library. 10. Simulating the subcircuit using HA_Test example
Show video info
Pre-requisite